P2138 Code — Throttle/Pedal Pos Sensor/Switch D / E Voltage Correlation
P2138: Throttle/Pedal Pos Sensor/Switch D / E Voltage Correlation. This is a Powertrain trouble code — a manufacturer-specific code whose exact meaning can vary by carmaker. Severity is generally Medium.
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
What the P2138 code means
| Code | P2138 |
|---|---|
| Definition | Throttle/Pedal Pos Sensor/Switch D / E Voltage Correlation |
| System | Powertrain — engine, transmission and associated drivetrain systems |
| Code type | Manufacturer-specific |
| Subsystem | Fuel and air metering |
| Fault reference | Fault #38 within the Powertrain group |
| Typical severity | Medium |
The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a manufacturer-defined code, so confirm the exact meaning against your carmaker's service information. Within powertrain codes, it points to the fuel and air metering area.
Common causes of P2138
P2138 sits in the SAE range covering throttle body and pedal position. Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:
- Carbon buildup around the throttle plate (the most common cause).
- A failing throttle position (TPS) or accelerator pedal position (APP) sensor.
- A worn throttle motor or gear (electronic throttle).
- A lost calibration after a battery disconnection.
Symptoms you may notice with P2138
Codes in the throttle body and pedal position range typically show up like this:
- High or hanging idle.
- Hesitation or a dead pedal feel.
- Limp mode with reduced power.
- Stalls at stops.
How to fix a P2138 code
- Read and record the code with an OBD-II scanner, along with any freeze-frame data.
- Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
- Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
- Clear the code and drive a full cycle, then re-scan to confirm it does not return.
Where to look first: clean the throttle plate bore first, then check TPS/APP voltage sweep across the pedal travel and re-learn the idle after cleaning.
Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.
Related OBD-II codes
Frequently Asked Questions
What does P2138 mean?
P2138 is a Powertrain diagnostic trouble code that means: Throttle/Pedal Pos Sensor/Switch D / E Voltage Correlation. It is Manufacturer-specific — the exact meaning can vary by carmaker.
Is it safe to drive with a P2138 code?
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
How do I fix a P2138 code?
Confirm P2138 with an OBD-II scanner, then work the ranked fixes below: start with inspect and clean throttle/pedal position sensor connector (most probable, Easy DIY), verify with a re-scan after each repair. Estimated repair cost ranges from $5 to $64 including labor (editorial estimate, US aftermarket).
Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.
flex;gap:.6rem;flex-wrap:wrap">
Ranked by how often the fix resolves the code, based on VinSpecs editorial analysis of US aftermarket repair patterns. Costs are editorial estimates for US aftermarket parts and shop labor (about $110/hour); actual quotes vary by vehicle, region and shop — get a real quote before authorizing work.
Probability rank #1 · Difficulty: Easy DIY
· Estimated total: $5–$64
(parts $5–$20 + labor 0.4 h)
Parts/tools involved: Electrical contact cleaner.
Probability rank #2 · Difficulty: Moderate DIY
· Estimated total: $60–$368
(parts $60–$280 + labor 0.8 h)
Parts/tools involved: Electronic throttle body assembly, Accelerator pedal position sensor assembly.
Probability rank #3 · Difficulty: Professional Required
· Estimated total: $10–$203
(parts $10–$60 + labor 1.3 h)
Parts/tools involved: Automotive wiring repair kit (solder + heat-shrink). Cost basis: VinSpecs editorial dataset Most likely fixes for P2138, ranked
1. Inspect and clean throttle/pedal position sensor connector
2. Replace throttle body or pedal position sensor assembly
3. Repair throttle/pedal position sensor wiring
obd-editorial-us-aftermarket-v1 (US aftermarket, generated 2026-11-14). Verify the diagnosis on your specific vehicle before replacing parts. Report a data error.
Related Guides
Free, data-backed reading that goes deeper on what this page covers: