P2002 Code — Diesel Particulate Filter Efficiency Below Threshold Bank 1
P2002: Diesel Particulate Filter Efficiency Below Threshold Bank 1. This is a Powertrain trouble code — a manufacturer-specific code whose exact meaning can vary by carmaker. Severity is generally Medium.
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
What the P2002 code means
| Code | P2002 |
|---|---|
| Definition | Diesel Particulate Filter Efficiency Below Threshold Bank 1 |
| System | Powertrain — engine, transmission and associated drivetrain systems |
| Code type | Manufacturer-specific |
| Subsystem | Fuel and air metering, plus auxiliary emission controls |
| Fault reference | Fault #02 within the Powertrain group |
| Typical severity | Medium |
The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a manufacturer-defined code, so confirm the exact meaning against your carmaker's service information. Within powertrain codes, it points to the fuel and air metering, plus auxiliary emission controls area.
Common causes of P2002
P2002 sits in the SAE range covering fuel and air metering and auxiliary emission controls (this SAE range also carries engine position and timing codes). Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:
- A contaminated or failing mass air flow (MAF) or manifold absolute pressure (MAP) sensor skewing the air measurement.
- Vacuum or intake leaks letting unmetered air past the sensor.
- Aged upstream oxygen (O2) sensors feeding the fuel trim wrong values.
- EVAP purge or vent valves sticking open or closed.
- Camshaft or crankshaft position sensors and their tone wheels (engine position codes such as P0008 live in this range).
- Connector corrosion, chafed wiring or a weak ground in the named circuit.
Symptoms you may notice with P2002
Codes in the fuel and air metering and auxiliary emission controls (this SAE range also carries engine position and timing codes) range typically show up like this:
- Check-engine light with no change in how the car drives (common on emissions-only faults).
- Rough or unstable idle, especially when cold.
- Hesitation or stumbling under light acceleration.
- Hard starting or a failed emissions test.
How to fix a P2002 code
- Read and record the code with an OBD-II scanner, along with any freeze-frame data.
- Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
- Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
- Clear the code and drive a full cycle, then re-scan to confirm it does not return.
Where to look first: trace the intake tract for unmetered air, check the connectors and grounds of the sensors the code names, and when the definition mentions position or timing, test the camshaft/crankshaft sensors before touching fuel parts.
Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.
Related OBD-II codes
Frequently Asked Questions
What does P2002 mean?
P2002 is a Powertrain diagnostic trouble code that means: Diesel Particulate Filter Efficiency Below Threshold Bank 1. It is Manufacturer-specific — the exact meaning can vary by carmaker.
Is it safe to drive with a P2002 code?
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
How do I fix a P2002 code?
Confirm P2002 with an OBD-II scanner, then work the ranked fixes below: start with inspect dpf differential pressure sensor hoses for cracks or swapped routing (most probable, Easy DIY), verify with a re-scan after each repair. Estimated repair cost ranges from $10 to $96 including labor (editorial estimate, US aftermarket).
Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.
flex;gap:.6rem;flex-wrap:wrap">
Ranked by how often the fix resolves the code, based on VinSpecs editorial analysis of US aftermarket repair patterns. Costs are editorial estimates for US aftermarket parts and shop labor (about $110/hour); actual quotes vary by vehicle, region and shop — get a real quote before authorizing work.
Probability rank #1 · Difficulty: Easy DIY
· Estimated total: $10–$96
(parts $10–$30 + labor 0.6 h)
Parts/tools involved: High-temperature silicone vacuum hose, Hose clamp set.
Probability rank #2 · Difficulty: Moderate DIY
· Estimated total: $20–$170
(parts $20–$60 + labor 1.0 h)
Parts/tools involved: Diesel exhaust fluid (DEF).
Probability rank #3 · Difficulty: Professional Required
· Estimated total: $250–$765
(parts $250–$600 + labor 1.5 h)
Parts/tools involved: Exhaust gasket and clamp set.
Probability rank #4 · Difficulty: Professional Required
· Estimated total: $1,200–$3,585
(parts $1,200–$3,200 + labor 3.5 h)
Parts/tools involved: Diesel particulate filter assembly, Exhaust gasket and clamp set. Cost basis: VinSpecs editorial dataset Most likely fixes for P2002, ranked
1. Inspect DPF differential pressure sensor hoses for cracks or swapped routing
2. Perform a manual DPF regeneration and inspect soot loading
3. Send the DPF out for professional cleaning (ash removal)
4. Replace the diesel particulate filter assembly
obd-editorial-us-aftermarket-v1 (US aftermarket, generated 2026-11-14). Verify the diagnosis on your specific vehicle before replacing parts. Report a data error.
Related Guides
Free, data-backed reading that goes deeper on what this page covers: