P2745 Code — Shaft Speed Sensor B Circuit
P2745: Shaft Speed Sensor B Circuit. This is a Powertrain trouble code — a manufacturer-specific code whose exact meaning can vary by carmaker. Severity is generally Medium.
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
What the P2745 code means
| Code | P2745 |
|---|---|
| Definition | Shaft Speed Sensor B Circuit |
| System | Powertrain — engine, transmission and associated drivetrain systems |
| Code type | Manufacturer-specific |
| Subsystem | Transmission |
| Fault reference | Fault #45 within the Powertrain group |
| Typical severity | Medium |
The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a manufacturer-defined code, so confirm the exact meaning against your carmaker's service information. Within powertrain codes, it points to the transmission area.
Common causes of P2745
P2745 sits in the SAE range covering vehicle speed sensor circuit. Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:
- A failing VSS (magnetic or Hall-effect).
- A damaged tone ring the sensor reads.
- Wiring between the sensor, the cluster and the modules.
- ABS-module path faults where the speed signal routes through it.
Symptoms you may notice with P2745
Codes in the vehicle speed sensor circuit range typically show up like this:
- Speedometer dead or erratic.
- Cruise control dropping out.
- Erratic or harsh shifting (the TCM uses the signal).
- ABS or traction lights.
How to fix a P2745 code
- Read and record the code with an OBD-II scanner, along with any freeze-frame data.
- Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
- Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
- Clear the code and drive a full cycle, then re-scan to confirm it does not return.
Where to look first: watch the speed signal live while rolling and compare it against ABS wheel-speed data to see exactly where the signal is lost.
Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.
What repairs in this range typically cost
P2745 itself is not in VinSpecs' ranked-fixes dataset yet, but across 8 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $5–$420. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0700 shows how a covered code in this range is priced.
Related OBD-II codes
Frequently Asked Questions
What does P2745 mean?
P2745 is a Powertrain diagnostic trouble code that means: Shaft Speed Sensor B Circuit. It is Manufacturer-specific — the exact meaning can vary by carmaker.
Is it safe to drive with a P2745 code?
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
How do I fix a P2745 code?
Confirm P2745 with an OBD-II scanner, then start with the speed signal compared live against ABS wheel-speed data. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.
Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.
flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →
Related Guides
Free, data-backed reading that goes deeper on what this page covers: