P2589 Code — Turbocharger Boost Control Position SensorBCircuit High

P2589: Turbocharger Boost Control Position SensorBCircuit High. This is a Powertrain trouble code — a manufacturer-specific code whose exact meaning can vary by carmaker. Severity is generally Medium.

Medium priority

Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.

What the P2589 code means

CodeP2589
DefinitionTurbocharger Boost Control Position SensorBCircuit High
SystemPowertrain — engine, transmission and associated drivetrain systems
Code typeManufacturer-specific
SubsystemVehicle speed control, idle control and auxiliary inputs
Fault referenceFault #89 within the Powertrain group
Typical severityMedium

The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a manufacturer-defined code, so confirm the exact meaning against your carmaker's service information. Within powertrain codes, it points to the vehicle speed control, idle control and auxiliary inputs area.

Common causes of P2589

P2589 sits in the SAE range covering boost control (turbo or supercharger). Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:

  • A sticking wastegate or diverter valve actuator.
  • A failed boost control solenoid or its wiring.
  • Leaks in the charge piping or intercooler boots.
  • Stuck variable-geometry turbo vanes (soot buildup).

Symptoms you may notice with P2589

Codes in the boost control (turbo or supercharger) range typically show up like this:

  • Loss of power (under-boost) or over-boost limp.
  • Whistling from a pressure leak.
  • Reduced-power mode on modern engines.
  • Poor fuel economy.

How to fix a P2589 code

  1. Read and record the code with an OBD-II scanner, along with any freeze-frame data.
  2. Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
  3. Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
  4. Clear the code and drive a full cycle, then re-scan to confirm it does not return.

Where to look first: pressure-test the charge system for leaks, command the boost solenoid with a scan tool, and inspect actuator linkage movement before replacing the turbo.

Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.

What repairs in this range typically cost

P2589 itself is not in VinSpecs' ranked-fixes dataset yet, but across 6 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $5–$515. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0500 shows how a covered code in this range is priced.

Related OBD-II codes

Frequently Asked Questions

What does P2589 mean?

P2589 is a Powertrain diagnostic trouble code that means: Turbocharger Boost Control Position SensorBCircuit High. It is Manufacturer-specific — the exact meaning can vary by carmaker.

Is it safe to drive with a P2589 code?

Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.

How do I fix a P2589 code?

Confirm P2589 with an OBD-II scanner, then start with a charge-system pressure test, then commanded boost-solenoid checks. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.

Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.

flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →