P215B Code — Speed - Output Shaft Speed Correlation
P215B: Speed - Output Shaft Speed Correlation. This is a Powertrain trouble code — a manufacturer-specific code whose exact meaning can vary by carmaker. Severity is generally Medium.
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
What the P215B code means
| Code | P215B |
|---|---|
| Definition | Speed - Output Shaft Speed Correlation |
| System | Powertrain — engine, transmission and associated drivetrain systems |
| Code type | Manufacturer-specific |
| Subsystem | Fuel and air metering |
| Fault reference | Fault #5B within the Powertrain group |
| Typical severity | Medium |
The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a manufacturer-defined code, so confirm the exact meaning against your carmaker's service information. Within powertrain codes, it points to the fuel and air metering area.
Common causes of P215B
P215B sits in the SAE range covering engine position and timing. Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:
- A failing camshaft (CMP) or crankshaft (CKP) position sensor.
- A worn or chipped tone wheel the sensor reads.
- A stretched timing chain or worn guides shifting cam-crank correlation.
- A sticking VVT actuator or oil control valve (often oil-level sensitive).
- Wiring or connector faults on the sensor circuit.
Symptoms you may notice with P215B
Codes in the engine position and timing range typically show up like this:
- Hard starting or no-start (CKP faults).
- Rough idle and occasional stalling.
- Reduced power or rattling at startup.
- Check-engine light with position-correlation codes.
How to fix a P215B code
- Read and record the code with an OBD-II scanner, along with any freeze-frame data.
- Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
- Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
- Clear the code and drive a full cycle, then re-scan to confirm it does not return.
Where to look first: check oil level and condition first (VVT faults track it closely), compare CMP/CKP signals live if you have the tool, and inspect the timing chain only after sensors and wiring test clean.
Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.
What repairs in this range typically cost
P215B itself is not in VinSpecs' ranked-fixes dataset yet, but across 23 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $0–$670. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0101 shows how a covered code in this range is priced.
Related OBD-II codes
Frequently Asked Questions
What does P215B mean?
P215B is a Powertrain diagnostic trouble code that means: Speed - Output Shaft Speed Correlation. It is Manufacturer-specific — the exact meaning can vary by carmaker.
Is it safe to drive with a P215B code?
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
How do I fix a P215B code?
Confirm P215B with an OBD-II scanner, then start with oil level and condition, then the CMP/CKP sensors and their wiring. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.
Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.
flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →
Related Guides
Free, data-backed reading that goes deeper on what this page covers: