P2139 Code — Throttle/Pedal Pos Sensor/Switch D / F Voltage Correlation
P2139: Throttle/Pedal Pos Sensor/Switch D / F Voltage Correlation. This is a Powertrain trouble code — a manufacturer-specific code whose exact meaning can vary by carmaker. Severity is generally Medium.
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
What the P2139 code means
| Code | P2139 |
|---|---|
| Definition | Throttle/Pedal Pos Sensor/Switch D / F Voltage Correlation |
| System | Powertrain — engine, transmission and associated drivetrain systems |
| Code type | Manufacturer-specific |
| Subsystem | Fuel and air metering |
| Fault reference | Fault #39 within the Powertrain group |
| Typical severity | Medium |
The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a manufacturer-defined code, so confirm the exact meaning against your carmaker's service information. Within powertrain codes, it points to the fuel and air metering area.
Common causes of P2139
P2139 sits in the SAE range covering throttle body and pedal position. Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:
- Carbon buildup around the throttle plate (the most common cause).
- A failing throttle position (TPS) or accelerator pedal position (APP) sensor.
- A worn throttle motor or gear (electronic throttle).
- A lost calibration after a battery disconnection.
Symptoms you may notice with P2139
Codes in the throttle body and pedal position range typically show up like this:
- High or hanging idle.
- Hesitation or a dead pedal feel.
- Limp mode with reduced power.
- Stalls at stops.
How to fix a P2139 code
- Read and record the code with an OBD-II scanner, along with any freeze-frame data.
- Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
- Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
- Clear the code and drive a full cycle, then re-scan to confirm it does not return.
Where to look first: clean the throttle plate bore first, then check TPS/APP voltage sweep across the pedal travel and re-learn the idle after cleaning.
Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.
What repairs in this range typically cost
P2139 itself is not in VinSpecs' ranked-fixes dataset yet, but across 23 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $0–$670. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0101 shows how a covered code in this range is priced.
Related OBD-II codes
Frequently Asked Questions
What does P2139 mean?
P2139 is a Powertrain diagnostic trouble code that means: Throttle/Pedal Pos Sensor/Switch D / F Voltage Correlation. It is Manufacturer-specific — the exact meaning can vary by carmaker.
Is it safe to drive with a P2139 code?
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
How do I fix a P2139 code?
Confirm P2139 with an OBD-II scanner, then start with throttle-body cleaning, then the TPS/APP voltage sweep. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.
Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.
flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →
Related Guides
Free, data-backed reading that goes deeper on what this page covers: