P0966 Code — Control SolenoidBControl Circuit Low
P0966: Control SolenoidBControl Circuit Low. This is a Powertrain trouble code — a generic OBD-II code that means the same thing on every make and model. Severity is generally Medium.
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
What the P0966 code means
| Code | P0966 |
|---|---|
| Definition | Control SolenoidBControl Circuit Low |
| System | Powertrain — engine, transmission and associated drivetrain systems |
| Code type | Generic (SAE J2012 standard) |
| Subsystem | Transmission and gearbox sensors |
| Fault reference | Fault #66 within the Powertrain group |
| Typical severity | Medium |
The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a standardized SAE code, so the definition above applies to any OBD-II compliant vehicle from 1996 onward. Within powertrain codes, it points to the transmission and gearbox sensors area.
Common causes of P0966
P0966 sits in the SAE range covering transmission and gearbox sensors. Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:
- A failing input or output shaft speed sensor.
- A worn tone wheel the sensor reads.
- Gear position (PRNDL) sensor drift.
- Wiring between the sensor and the TCM.
Symptoms you may notice with P0966
Codes in the transmission and gearbox sensors range typically show up like this:
- Erratic or skipped shifts.
- Incorrect gear display or speed-dependent faults.
- Shift points that vary between drives.
- Harsh engagement from a lost speed signal.
How to fix a P0966 code
- Read and record the code with an OBD-II scanner, along with any freeze-frame data.
- Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
- Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
- Clear the code and drive a full cycle, then re-scan to confirm it does not return.
Where to look first: compare input and output speed sensor readings live during a drive; a signal that drops out points at the sensor, its tone wheel or the wiring in that path.
Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.
Related OBD-II codes
Frequently Asked Questions
What does P0966 mean?
P0966 is a Powertrain diagnostic trouble code that means: Control SolenoidBControl Circuit Low. It is Generic (SAE standard) — the same meaning on every OBD-II vehicle.
Is it safe to drive with a P0966 code?
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
How do I fix a P0966 code?
Confirm P0966 with an OBD-II scanner, then start with the input and output speed sensors, compared live during a drive. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.
Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.
flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →
Related Guides
Free, data-backed reading that goes deeper on what this page covers: