P0714 Code — Transmission Fluid Temperature Sensor A Circuit Intermittent
P0714: Transmission Fluid Temperature Sensor A Circuit Intermittent. This is a Powertrain trouble code — a generic OBD-II code that means the same thing on every make and model. Severity is generally Medium.
Cooling-related faults can lead to overheating. Monitor the temperature gauge and address soon.
What the P0714 code means
| Code | P0714 |
|---|---|
| Definition | Transmission Fluid Temperature Sensor A Circuit Intermittent |
| System | Powertrain — engine, transmission and associated drivetrain systems |
| Code type | Generic (SAE J2012 standard) |
| Subsystem | Transmission |
| Fault reference | Fault #14 within the Powertrain group |
| Typical severity | Medium |
The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a standardized SAE code, so the definition above applies to any OBD-II compliant vehicle from 1996 onward. Within powertrain codes, it points to the transmission area.
Common causes of P0714
P0714 sits in the SAE range covering transmission. Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:
- Low, burnt or wrong-spec transmission fluid.
- Failed pressure control or shift solenoids (electrical or stuck).
- Valve-body wear or a stuck valve.
- Torque converter clutch (TCC) solenoid or its circuit.
- Wiring or connector faults between the TCM and the solenoids.
Symptoms you may notice with P0714
Codes in the transmission range typically show up like this:
- Harsh, delayed or flaring shifts.
- Slipping under load.
- Stuck in one gear or a limp-home mode.
- Shudder at converter lockup.
How to fix a P0714 code
- Read and record the code with an OBD-II scanner, along with any freeze-frame data.
- Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
- Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
- Clear the code and drive a full cycle, then re-scan to confirm it does not return.
Where to look first: check the fluid level and condition first (many solenoid codes start there), then test solenoid resistance and command them on/off with a scan tool before opening the pan.
Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.
What repairs in this range typically cost
P0714 itself is not in VinSpecs' ranked-fixes dataset yet, but across 8 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $5–$420. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0700 shows how a covered code in this range is priced.
Related OBD-II codes
Frequently Asked Questions
What does P0714 mean?
P0714 is a Powertrain diagnostic trouble code that means: Transmission Fluid Temperature Sensor A Circuit Intermittent. It is Generic (SAE standard) — the same meaning on every OBD-II vehicle.
Is it safe to drive with a P0714 code?
Cooling-related faults can lead to overheating. Monitor the temperature gauge and address soon.
How do I fix a P0714 code?
Confirm P0714 with an OBD-II scanner, then start with the transmission fluid level and condition, then commanded solenoid tests. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.
Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.
flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →
Related Guides
Free, data-backed reading that goes deeper on what this page covers: