P068E Code — 8 Glow Plug Control Circuit Low
P068E: 8 Glow Plug Control Circuit Low. This is a Powertrain trouble code — a generic OBD-II code that means the same thing on every make and model. Severity is generally Medium.
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
What the P068E code means
| Code | P068E |
|---|---|
| Definition | 8 Glow Plug Control Circuit Low |
| System | Powertrain — engine, transmission and associated drivetrain systems |
| Code type | Generic (SAE J2012 standard) |
| Subsystem | Computer output circuits |
| Fault reference | Fault #8E within the Powertrain group |
| Typical severity | Medium |
The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a standardized SAE code, so the definition above applies to any OBD-II compliant vehicle from 1996 onward. Within powertrain codes, it points to the computer output circuits area.
Common causes of P068E
P068E sits in the SAE range covering computer output circuits. Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:
- An internal PCM/ECM fault (memory, processor or output driver).
- A failed output driver controlling a solenoid or relay.
- Corroded connectors or an intermittent ground on a module circuit.
- A check-engine lamp (MIL) driver fault.
Symptoms you may notice with P068E
Codes in the computer output circuits range typically show up like this:
- Usually no change in how the car drives.
- Intermittent electrical oddities or warning lights.
- Modules failing self-test or not communicating.
- A check-engine light that never illuminates (MIL circuit codes).
How to fix a P068E code
- Read and record the code with an OBD-II scanner, along with any freeze-frame data.
- Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
- Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
- Clear the code and drive a full cycle, then re-scan to confirm it does not return.
Where to look first: rule out wiring and grounds first; if the circuit tests clean, the fault is inside the module. Confirm with a battery and ground check before condemning a PCM.
Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.
What repairs in this range typically cost
P068E itself is not in VinSpecs' ranked-fixes dataset yet, but across 1 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $5–$1,065. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0606 shows how a covered code in this range is priced.
Related OBD-II codes
Frequently Asked Questions
What does P068E mean?
P068E is a Powertrain diagnostic trouble code that means: 8 Glow Plug Control Circuit Low. It is Generic (SAE standard) — the same meaning on every OBD-II vehicle.
Is it safe to drive with a P068E code?
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
How do I fix a P068E code?
Confirm P068E with an OBD-II scanner, then start with the wiring and grounds of the named circuit, then the module itself. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.
Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.
flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →
Related Guides
Free, data-backed reading that goes deeper on what this page covers: