P060D Code — Internal Control Module Accelerator Pedal Position Performance

P060D: Internal Control Module Accelerator Pedal Position Performance. This is a Powertrain trouble code — a generic OBD-II code that means the same thing on every make and model. Severity is generally Medium.

Medium priority

Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.

What the P060D code means

CodeP060D
DefinitionInternal Control Module Accelerator Pedal Position Performance
SystemPowertrain — engine, transmission and associated drivetrain systems
Code typeGeneric (SAE J2012 standard)
SubsystemComputer output circuits
Fault referenceFault #0D within the Powertrain group
Typical severityMedium

The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a standardized SAE code, so the definition above applies to any OBD-II compliant vehicle from 1996 onward. Within powertrain codes, it points to the computer output circuits area.

Common causes of P060D

P060D sits in the SAE range covering throttle body and pedal position. Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:

  • Carbon buildup around the throttle plate (the most common cause).
  • A failing throttle position (TPS) or accelerator pedal position (APP) sensor.
  • A worn throttle motor or gear (electronic throttle).
  • A lost calibration after a battery disconnection.

Symptoms you may notice with P060D

Codes in the throttle body and pedal position range typically show up like this:

  • High or hanging idle.
  • Hesitation or a dead pedal feel.
  • Limp mode with reduced power.
  • Stalls at stops.

How to fix a P060D code

  1. Read and record the code with an OBD-II scanner, along with any freeze-frame data.
  2. Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
  3. Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
  4. Clear the code and drive a full cycle, then re-scan to confirm it does not return.

Where to look first: clean the throttle plate bore first, then check TPS/APP voltage sweep across the pedal travel and re-learn the idle after cleaning.

Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.

What repairs in this range typically cost

P060D itself is not in VinSpecs' ranked-fixes dataset yet, but across 1 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $5–$1,065. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0606 shows how a covered code in this range is priced.

Related OBD-II codes

Frequently Asked Questions

What does P060D mean?

P060D is a Powertrain diagnostic trouble code that means: Internal Control Module Accelerator Pedal Position Performance. It is Generic (SAE standard) — the same meaning on every OBD-II vehicle.

Is it safe to drive with a P060D code?

Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.

How do I fix a P060D code?

Confirm P060D with an OBD-II scanner, then start with throttle-body cleaning, then the TPS/APP voltage sweep. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.

Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.

flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →