P0550 Code — Power Steering Pressure Sensor Circuit Malfunction

P0550: Power Steering Pressure Sensor Circuit Malfunction. This is a Powertrain trouble code — a generic OBD-II code that means the same thing on every make and model. Severity is generally Medium.

Medium priority

Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.

What the P0550 code means

CodeP0550
DefinitionPower Steering Pressure Sensor Circuit Malfunction
SystemPowertrain — engine, transmission and associated drivetrain systems
Code typeGeneric (SAE J2012 standard)
SubsystemVehicle speed control, idle control and auxiliary inputs
Fault referenceFault #50 within the Powertrain group
Typical severityMedium

The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a standardized SAE code, so the definition above applies to any OBD-II compliant vehicle from 1996 onward. Within powertrain codes, it points to the vehicle speed control, idle control and auxiliary inputs area.

Common causes of P0550

P0550 sits in the SAE range covering vehicle speed control, idle control and auxiliary inputs. Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:

  • Carbon buildup in the throttle body or the idle air control (IAC) passage.
  • A failing idle air control valve or its circuit.
  • A vehicle speed sensor (VSS) or its tone ring.
  • Brake switch, A/C clutch or other input circuits the PCM monitors.

Symptoms you may notice with P0550

Codes in the vehicle speed control, idle control and auxiliary inputs range typically show up like this:

  • Idle that surges, hangs high or stalls at stops.
  • Cruise control or speedometer faults (on VSS codes).
  • Stalls when the A/C or another load kicks in.
  • Check-engine light with otherwise normal running.

How to fix a P0550 code

  1. Read and record the code with an OBD-II scanner, along with any freeze-frame data.
  2. Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
  3. Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
  4. Clear the code and drive a full cycle, then re-scan to confirm it does not return.

Where to look first: clean the throttle body and IAC passage first (a common cure for idle codes), then test the named input circuit with a multimeter before replacing any module.

Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.

What repairs in this range typically cost

P0550 itself is not in VinSpecs' ranked-fixes dataset yet, but across 6 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $5–$515. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0500 shows how a covered code in this range is priced.

Related OBD-II codes

Frequently Asked Questions

What does P0550 mean?

P0550 is a Powertrain diagnostic trouble code that means: Power Steering Pressure Sensor Circuit Malfunction. It is Generic (SAE standard) — the same meaning on every OBD-II vehicle.

Is it safe to drive with a P0550 code?

Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.

How do I fix a P0550 code?

Confirm P0550 with an OBD-II scanner, then start with the throttle body and idle air control passage, cleaned before electrical tests. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.

Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.

flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →