P0498 Code — Evaporative Emission System Vent Valve Control Circuit Low
P0498: Evaporative Emission System Vent Valve Control Circuit Low. This is a Powertrain trouble code — a generic OBD-II code that means the same thing on every make and model. Severity is generally Low.
Typically an emissions/EVAP issue — safe to drive, but it will fail an emissions test and should be repaired.
What the P0498 code means
| Code | P0498 |
|---|---|
| Definition | Evaporative Emission System Vent Valve Control Circuit Low |
| System | Powertrain — engine, transmission and associated drivetrain systems |
| Code type | Generic (SAE J2012 standard) |
| Subsystem | Auxiliary emission controls |
| Fault reference | Fault #98 within the Powertrain group |
| Typical severity | Low |
The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a standardized SAE code, so the definition above applies to any OBD-II compliant vehicle from 1996 onward. Within powertrain codes, it points to the auxiliary emission controls area.
Common causes of P0498
P0498 sits in the SAE range covering EVAP (evaporative emissions). Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:
- A loose, wrong or hardened fuel cap seal.
- A purge or vent valve stuck open or closed.
- A cracked hose or leaking seal on the tank, filler neck or canister.
- A failing fuel tank pressure (FTP) sensor.
- Pinhole leaks only a smoke test will find.
Symptoms you may notice with P0498
Codes in the EVAP (evaporative emissions) range typically show up like this:
- Usually no drivability symptom at all.
- A failed emissions inspection.
- Fuel smell after fill-ups (vent-valve faults).
- The check-engine light as the only sign.
How to fix a P0498 code
- Read and record the code with an OBD-II scanner, along with any freeze-frame data.
- Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
- Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
- Clear the code and drive a full cycle, then re-scan to confirm it does not return.
Where to look first: smoke-test the system rather than replacing parts on a guess; check the gas cap seal first and command the purge/vent valves with a scan tool.
Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.
What repairs in this range typically cost
P0498 itself is not in VinSpecs' ranked-fixes dataset yet, but across 13 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $5–$1,720. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0401 shows how a covered code in this range is priced.
Related OBD-II codes
Frequently Asked Questions
What does P0498 mean?
P0498 is a Powertrain diagnostic trouble code that means: Evaporative Emission System Vent Valve Control Circuit Low. It is Generic (SAE standard) — the same meaning on every OBD-II vehicle.
Is it safe to drive with a P0498 code?
Typically an emissions/EVAP issue — safe to drive, but it will fail an emissions test and should be repaired.
How do I fix a P0498 code?
Confirm P0498 with an OBD-II scanner, then start with the fuel cap seal, the purge and vent valves, then a smoke test for the leak. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.
Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.
flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →
Related Guides
Free, data-backed reading that goes deeper on what this page covers: