P0488 Code — Exhaust Gas Recirculation Throttle Control CircuitARange/Performance
P0488: Exhaust Gas Recirculation Throttle Control CircuitARange/Performance. This is a Powertrain trouble code — a generic OBD-II code that means the same thing on every make and model. Severity is generally Medium.
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
What the P0488 code means
| Code | P0488 |
|---|---|
| Definition | Exhaust Gas Recirculation Throttle Control CircuitARange/Performance |
| System | Powertrain — engine, transmission and associated drivetrain systems |
| Code type | Generic (SAE J2012 standard) |
| Subsystem | Auxiliary emission controls |
| Fault reference | Fault #88 within the Powertrain group |
| Typical severity | Medium |
The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a standardized SAE code, so the definition above applies to any OBD-II compliant vehicle from 1996 onward. Within powertrain codes, it points to the auxiliary emission controls area.
Common causes of P0488
P0488 sits in the SAE range covering throttle body and pedal position. Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:
- Carbon buildup around the throttle plate (the most common cause).
- A failing throttle position (TPS) or accelerator pedal position (APP) sensor.
- A worn throttle motor or gear (electronic throttle).
- A lost calibration after a battery disconnection.
Symptoms you may notice with P0488
Codes in the throttle body and pedal position range typically show up like this:
- High or hanging idle.
- Hesitation or a dead pedal feel.
- Limp mode with reduced power.
- Stalls at stops.
How to fix a P0488 code
- Read and record the code with an OBD-II scanner, along with any freeze-frame data.
- Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
- Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
- Clear the code and drive a full cycle, then re-scan to confirm it does not return.
Where to look first: clean the throttle plate bore first, then check TPS/APP voltage sweep across the pedal travel and re-learn the idle after cleaning.
Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.
What repairs in this range typically cost
P0488 itself is not in VinSpecs' ranked-fixes dataset yet, but across 13 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $5–$1,720. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0401 shows how a covered code in this range is priced.
Related OBD-II codes
Frequently Asked Questions
What does P0488 mean?
P0488 is a Powertrain diagnostic trouble code that means: Exhaust Gas Recirculation Throttle Control CircuitARange/Performance. It is Generic (SAE standard) — the same meaning on every OBD-II vehicle.
Is it safe to drive with a P0488 code?
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
How do I fix a P0488 code?
Confirm P0488 with an OBD-II scanner, then start with throttle-body cleaning, then the TPS/APP voltage sweep. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.
Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.
flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →
Related Guides
Free, data-backed reading that goes deeper on what this page covers: