P0332 Code — Knock Sensor 2 Circuit Low Input (Bank 2)

P0332: Knock Sensor 2 Circuit Low Input (Bank 2). This is a Powertrain trouble code — a generic OBD-II code that means the same thing on every make and model. Severity is generally High.

High priority

Misfires can damage the catalytic converter and should be diagnosed promptly. Avoid hard acceleration until fixed.

What the P0332 code means

CodeP0332
DefinitionKnock Sensor 2 Circuit Low Input (Bank 2)
SystemPowertrain — engine, transmission and associated drivetrain systems
Code typeGeneric (SAE J2012 standard)
SubsystemIgnition system or misfire
Fault referenceFault #32 within the Powertrain group
Typical severityHigh

The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a standardized SAE code, so the definition above applies to any OBD-II compliant vehicle from 1996 onward. Within powertrain codes, it points to the ignition system or misfire area.

Common causes of P0332

P0332 sits in the SAE range covering ignition system or misfire. Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:

  • Worn or fouled spark plugs.
  • A failing ignition coil (or plug wire/boot on older systems).
  • A clogged or leaking fuel injector on the affected cylinder.
  • Low cylinder compression from a valve, ring or head-gasket fault.
  • A vacuum leak leaning the mixture enough to misfire.

Symptoms you may notice with P0332

Codes in the ignition system or misfire range typically show up like this:

  • Rough idle and shaking at a stop.
  • Flashing check-engine light (avoid hard acceleration).
  • Loss of power or hesitation.
  • Hard starting or a fuel smell.

How to fix a P0332 code

  1. Read and record the code with an OBD-II scanner, along with any freeze-frame data.
  2. Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
  3. Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
  4. Clear the code and drive a full cycle, then re-scan to confirm it does not return.

Where to look first: pull the plugs on the affected cylinder, swap its coil with a neighbor to see whether the misfire follows the coil, and run a compression test before buying parts.

Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.

What repairs in this range typically cost

P0332 itself is not in VinSpecs' ranked-fixes dataset yet, but across 11 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $5–$1,395. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0300 shows how a covered code in this range is priced.

Related OBD-II codes

Frequently Asked Questions

What does P0332 mean?

P0332 is a Powertrain diagnostic trouble code that means: Knock Sensor 2 Circuit Low Input (Bank 2). It is Generic (SAE standard) — the same meaning on every OBD-II vehicle.

Is it safe to drive with a P0332 code?

Misfires can damage the catalytic converter and should be diagnosed promptly. Avoid hard acceleration until fixed.

How do I fix a P0332 code?

Confirm P0332 with an OBD-II scanner, then start with the plugs and coil on the affected cylinder, confirmed with a swap test. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.

Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.

flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →