P0239 Code — Turbocharger Boost Sensor B Circuit Malfunction
P0239: Turbocharger Boost Sensor B Circuit Malfunction. This is a Powertrain trouble code — a generic OBD-II code that means the same thing on every make and model. Severity is generally Medium.
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
What the P0239 code means
| Code | P0239 |
|---|---|
| Definition | Turbocharger Boost Sensor B Circuit Malfunction |
| System | Powertrain — engine, transmission and associated drivetrain systems |
| Code type | Generic (SAE J2012 standard) |
| Subsystem | Fuel and air metering (injector circuit) |
| Fault reference | Fault #39 within the Powertrain group |
| Typical severity | Medium |
The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a standardized SAE code, so the definition above applies to any OBD-II compliant vehicle from 1996 onward. Within powertrain codes, it points to the fuel and air metering (injector circuit) area.
Common causes of P0239
P0239 sits in the SAE range covering boost control (turbo or supercharger). Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:
- A sticking wastegate or diverter valve actuator.
- A failed boost control solenoid or its wiring.
- Leaks in the charge piping or intercooler boots.
- Stuck variable-geometry turbo vanes (soot buildup).
Symptoms you may notice with P0239
Codes in the boost control (turbo or supercharger) range typically show up like this:
- Loss of power (under-boost) or over-boost limp.
- Whistling from a pressure leak.
- Reduced-power mode on modern engines.
- Poor fuel economy.
How to fix a P0239 code
- Read and record the code with an OBD-II scanner, along with any freeze-frame data.
- Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
- Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
- Clear the code and drive a full cycle, then re-scan to confirm it does not return.
Where to look first: pressure-test the charge system for leaks, command the boost solenoid with a scan tool, and inspect actuator linkage movement before replacing the turbo.
Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.
Related OBD-II codes
Frequently Asked Questions
What does P0239 mean?
P0239 is a Powertrain diagnostic trouble code that means: Turbocharger Boost Sensor B Circuit Malfunction. It is Generic (SAE standard) — the same meaning on every OBD-II vehicle.
Is it safe to drive with a P0239 code?
Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.
How do I fix a P0239 code?
Confirm P0239 with an OBD-II scanner, then start with a charge-system pressure test, then commanded boost-solenoid checks. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.
Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.
flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →
Related Guides
Free, data-backed reading that goes deeper on what this page covers: