P021D Code — Cylinder 10 Injection Timing

P021D: Cylinder 10 Injection Timing. This is a Powertrain trouble code — a generic OBD-II code that means the same thing on every make and model. Severity is generally Medium.

Medium priority

Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.

What the P021D code means

CodeP021D
DefinitionCylinder 10 Injection Timing
SystemPowertrain — engine, transmission and associated drivetrain systems
Code typeGeneric (SAE J2012 standard)
SubsystemFuel and air metering (injector circuit)
Fault referenceFault #1D within the Powertrain group
Typical severityMedium

The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a standardized SAE code, so the definition above applies to any OBD-II compliant vehicle from 1996 onward. Within powertrain codes, it points to the fuel and air metering (injector circuit) area.

Common causes of P021D

P021D sits in the SAE range covering engine position and timing. Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:

  • A failing camshaft (CMP) or crankshaft (CKP) position sensor.
  • A worn or chipped tone wheel the sensor reads.
  • A stretched timing chain or worn guides shifting cam-crank correlation.
  • A sticking VVT actuator or oil control valve (often oil-level sensitive).
  • Wiring or connector faults on the sensor circuit.

Symptoms you may notice with P021D

Codes in the engine position and timing range typically show up like this:

  • Hard starting or no-start (CKP faults).
  • Rough idle and occasional stalling.
  • Reduced power or rattling at startup.
  • Check-engine light with position-correlation codes.

How to fix a P021D code

  1. Read and record the code with an OBD-II scanner, along with any freeze-frame data.
  2. Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
  3. Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
  4. Clear the code and drive a full cycle, then re-scan to confirm it does not return.

Where to look first: check oil level and condition first (VVT faults track it closely), compare CMP/CKP signals live if you have the tool, and inspect the timing chain only after sensors and wiring test clean.

Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.

Related OBD-II codes

Frequently Asked Questions

What does P021D mean?

P021D is a Powertrain diagnostic trouble code that means: Cylinder 10 Injection Timing. It is Generic (SAE standard) — the same meaning on every OBD-II vehicle.

Is it safe to drive with a P021D code?

Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.

How do I fix a P021D code?

Confirm P021D with an OBD-II scanner, then start with oil level and condition, then the CMP/CKP sensors and their wiring. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.

Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.

flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →