P0191 Code — Fuel Rail Pressure Sensor A Circuit Range/Performance

P0191: Fuel Rail Pressure Sensor A Circuit Range/Performance. This is a Powertrain trouble code — a generic OBD-II code that means the same thing on every make and model. Severity is generally Medium.

Medium priority

Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.

What the P0191 code means

CodeP0191
DefinitionFuel Rail Pressure Sensor A Circuit Range/Performance
SystemPowertrain — engine, transmission and associated drivetrain systems
Code typeGeneric (SAE J2012 standard)
SubsystemFuel and air metering
Fault referenceFault #91 within the Powertrain group
Typical severityMedium

The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a standardized SAE code, so the definition above applies to any OBD-II compliant vehicle from 1996 onward. Within powertrain codes, it points to the fuel and air metering area.

Common causes of P0191

P0191 sits in the SAE range covering fuel and air metering (MAF, oxygen and temperature sensors). Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:

  • A dirty or failing mass air flow (MAF) sensor.
  • An aging oxygen (O2) sensor or its heater circuit.
  • An engine coolant temperature (ECT) sensor drifting out of range.
  • A thermostat stuck open, so the engine never reaches regulated temperature.
  • Intake air temperature (IAT) sensor faults.
  • Wiring, connector or ground faults in the sensor circuit.

Symptoms you may notice with P0191

Codes in the fuel and air metering (MAF, oxygen and temperature sensors) range typically show up like this:

  • Poor fuel economy.
  • Hard starts when cold or hot.
  • Rough idle or surging.
  • Rich or lean running (fuel smell or black smoke).

How to fix a P0191 code

  1. Read and record the code with an OBD-II scanner, along with any freeze-frame data.
  2. Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
  3. Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
  4. Clear the code and drive a full cycle, then re-scan to confirm it does not return.

Where to look first: compare live sensor readings against expected values at cold start and at full operating temperature, and confirm the thermostat reaches regulated temperature before replacing sensors.

Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.

What repairs in this range typically cost

P0191 itself is not in VinSpecs' ranked-fixes dataset yet, but across 23 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $0–$670. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0101 shows how a covered code in this range is priced.

Related OBD-II codes

Frequently Asked Questions

What does P0191 mean?

P0191 is a Powertrain diagnostic trouble code that means: Fuel Rail Pressure Sensor A Circuit Range/Performance. It is Generic (SAE standard) — the same meaning on every OBD-II vehicle.

Is it safe to drive with a P0191 code?

Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.

How do I fix a P0191 code?

Confirm P0191 with an OBD-II scanner, then start with the MAF, O2 and coolant temperature sensors, verified against live readings. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.

Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.

flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →