P00B1 Code — Radiator Coolant Temperature Sensor Circuit
P00B1: Radiator Coolant Temperature Sensor Circuit. This is a Powertrain trouble code — a generic OBD-II code that means the same thing on every make and model. Severity is generally Medium.
Cooling-related faults can lead to overheating. Monitor the temperature gauge and address soon.
What the P00B1 code means
| Code | P00B1 |
|---|---|
| Definition | Radiator Coolant Temperature Sensor Circuit |
| System | Powertrain — engine, transmission and associated drivetrain systems |
| Code type | Generic (SAE J2012 standard) |
| Subsystem | Fuel and air metering, plus auxiliary emission controls |
| Fault reference | Fault #B1 within the Powertrain group |
| Typical severity | Medium |
The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a standardized SAE code, so the definition above applies to any OBD-II compliant vehicle from 1996 onward. Within powertrain codes, it points to the fuel and air metering, plus auxiliary emission controls area.
Common causes of P00B1
P00B1 sits in the SAE range covering engine coolant temperature. Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:
- A thermostat stuck open (engine never warms fully).
- An ECT sensor drifting out of range.
- Low coolant or air pockets in the system.
- Wiring or connector faults at the sensor.
Symptoms you may notice with P00B1
Codes in the engine coolant temperature range typically show up like this:
- Temperature gauge reading low or erratic.
- Poor fuel economy and weak heater output.
- Hard starts when cold.
- Overheating on real cooling faults.
How to fix a P00B1 code
- Read and record the code with an OBD-II scanner, along with any freeze-frame data.
- Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
- Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
- Clear the code and drive a full cycle, then re-scan to confirm it does not return.
Where to look first: watch ECT live from a cold start: it should climb steadily to about 190-210°F and hold. A reading stuck cold points at the thermostat; a jumpy one at the sensor or wiring.
Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.
What repairs in this range typically cost
P00B1 itself is not in VinSpecs' ranked-fixes dataset yet, but across 5 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $8–$3,585. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0011 shows how a covered code in this range is priced.
Related OBD-II codes
Frequently Asked Questions
What does P00B1 mean?
P00B1 is a Powertrain diagnostic trouble code that means: Radiator Coolant Temperature Sensor Circuit. It is Generic (SAE standard) — the same meaning on every OBD-II vehicle.
Is it safe to drive with a P00B1 code?
Cooling-related faults can lead to overheating. Monitor the temperature gauge and address soon.
How do I fix a P00B1 code?
Confirm P00B1 with an OBD-II scanner, then start with the ECT reading watched live from a cold start (thermostat vs sensor). Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.
Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.
flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →
Related Guides
Free, data-backed reading that goes deeper on what this page covers: