P00A0 Code — Charge Air Cooler Temperature Sensor Circuit Bank 2

P00A0: Charge Air Cooler Temperature Sensor Circuit Bank 2. This is a Powertrain trouble code — a generic OBD-II code that means the same thing on every make and model. Severity is generally Medium.

Medium priority

Cooling-related faults can lead to overheating. Monitor the temperature gauge and address soon.

What the P00A0 code means

CodeP00A0
DefinitionCharge Air Cooler Temperature Sensor Circuit Bank 2
SystemPowertrain — engine, transmission and associated drivetrain systems
Code typeGeneric (SAE J2012 standard)
SubsystemFuel and air metering, plus auxiliary emission controls
Fault referenceFault #A0 within the Powertrain group
Typical severityMedium

The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a standardized SAE code, so the definition above applies to any OBD-II compliant vehicle from 1996 onward. Within powertrain codes, it points to the fuel and air metering, plus auxiliary emission controls area.

Common causes of P00A0

P00A0 sits in the SAE range covering fuel and air metering and auxiliary emission controls (this SAE range also carries engine position and timing codes). Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:

  • A contaminated or failing mass air flow (MAF) or manifold absolute pressure (MAP) sensor skewing the air measurement.
  • Vacuum or intake leaks letting unmetered air past the sensor.
  • Aged upstream oxygen (O2) sensors feeding the fuel trim wrong values.
  • EVAP purge or vent valves sticking open or closed.
  • Camshaft or crankshaft position sensors and their tone wheels (engine position codes such as P0008 live in this range).
  • Connector corrosion, chafed wiring or a weak ground in the named circuit.

Symptoms you may notice with P00A0

Codes in the fuel and air metering and auxiliary emission controls (this SAE range also carries engine position and timing codes) range typically show up like this:

  • Check-engine light with no change in how the car drives (common on emissions-only faults).
  • Rough or unstable idle, especially when cold.
  • Hesitation or stumbling under light acceleration.
  • Hard starting or a failed emissions test.

How to fix a P00A0 code

  1. Read and record the code with an OBD-II scanner, along with any freeze-frame data.
  2. Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
  3. Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
  4. Clear the code and drive a full cycle, then re-scan to confirm it does not return.

Where to look first: trace the intake tract for unmetered air, check the connectors and grounds of the sensors the code names, and when the definition mentions position or timing, test the camshaft/crankshaft sensors before touching fuel parts.

Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.

What repairs in this range typically cost

P00A0 itself is not in VinSpecs' ranked-fixes dataset yet, but across 5 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $8–$3,585. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0011 shows how a covered code in this range is priced.

Related OBD-II codes

Frequently Asked Questions

What does P00A0 mean?

P00A0 is a Powertrain diagnostic trouble code that means: Charge Air Cooler Temperature Sensor Circuit Bank 2. It is Generic (SAE standard) — the same meaning on every OBD-II vehicle.

Is it safe to drive with a P00A0 code?

Cooling-related faults can lead to overheating. Monitor the temperature gauge and address soon.

How do I fix a P00A0 code?

Confirm P00A0 with an OBD-II scanner, then start with the sensors in the named circuit (MAF/MAP, O2 or camshaft/crankshaft position) and any vacuum leak. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.

Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.

flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →