P0059 Code — HO2S Heater Resistance (Bank 2, Sensor 1)

P0059: HO2S Heater Resistance (Bank 2, Sensor 1). This is a Powertrain trouble code — a generic OBD-II code that means the same thing on every make and model. Severity is generally Medium.

Medium priority

Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.

What the P0059 code means

CodeP0059
DefinitionHO2S Heater Resistance (Bank 2, Sensor 1)
SystemPowertrain — engine, transmission and associated drivetrain systems
Code typeGeneric (SAE J2012 standard)
SubsystemFuel and air metering, plus auxiliary emission controls
Fault referenceFault #59 within the Powertrain group
Typical severityMedium

The letter P tells you the code belongs to the Powertrain family, covering engine, transmission and associated drivetrain systems. The second digit shows this is a standardized SAE code, so the definition above applies to any OBD-II compliant vehicle from 1996 onward. Within powertrain codes, it points to the fuel and air metering, plus auxiliary emission controls area.

Common causes of P0059

P0059 sits in the SAE range covering oxygen (O2) sensor circuit. Components in that range fail in predictable ways, so the usual suspects here are specific rather than generic. Confirm the actual fault with a scan before replacing parts:

  • An aged sensor with slow voltage response.
  • A failed heater element or its fuse/relay circuit.
  • Contamination from coolant, oil or fuel additives.
  • An exhaust leak upstream of the sensor skewing the reading.
  • Wiring or connector faults (chafing near the exhaust is common).

Symptoms you may notice with P0059

Codes in the oxygen (O2) sensor circuit range typically show up like this:

  • Poor fuel economy.
  • Rough idle or hesitation.
  • A failed emissions test.
  • Often no drivability change (heater faults).

How to fix a P0059 code

  1. Read and record the code with an OBD-II scanner, along with any freeze-frame data.
  2. Inspect the wiring, connectors and components in the Powertrain circuit the code points to.
  3. Repair or replace the confirmed faulty part — avoid swapping parts on a guess.
  4. Clear the code and drive a full cycle, then re-scan to confirm it does not return.

Where to look first: watch the sensor switching frequency live at 2,000 rpm, confirm heater resistance against spec, and check for exhaust leaks before condemning the sensor.

Recall repairs are free at a dealer, so it is worth checking for an open recall or decoding your VIN before paying for diagnostics — some faults are covered.

What repairs in this range typically cost

P0059 itself is not in VinSpecs' ranked-fixes dataset yet, but across 5 comparable codes in the same SAE subsystem, editorial US-aftermarket repair totals (parts + shop labor at $110/hour) ranged $8–$3,585. Get a quote for your specific vehicle before authorizing work — the ranked-fixes example for P0011 shows how a covered code in this range is priced.

Related OBD-II codes

Frequently Asked Questions

What does P0059 mean?

P0059 is a Powertrain diagnostic trouble code that means: HO2S Heater Resistance (Bank 2, Sensor 1). It is Generic (SAE standard) — the same meaning on every OBD-II vehicle.

Is it safe to drive with a P0059 code?

Have the vehicle scanned and the root cause confirmed before extended driving. Severity depends on the specific fault and symptoms.

How do I fix a P0059 code?

Confirm P0059 with an OBD-II scanner, then start with the sensor switching rate live at 2,000 rpm and its heater resistance. Repair or replace the confirmed faulty part, clear the code and re-scan after a drive cycle. A professional diagnosis is recommended if you are unsure.

Code definition sourced from the open-source OBD-II code dataset (SAE J2012 / ISO 15031 standard). VinSpecs is an independent service and is not affiliated with any vehicle manufacturer.

flex;gap:.6rem;flex-wrap:wrap"> ← All OBD-II codes Decode your VIN →